Heat Transfer Lab | 9997200000 | Thermal Conductivity of Metal Rod Apparatus in roorkee

Our Products

Heat Transfer Lab

1.Thermal Conductivity of Metal Rod Apparatus

This apparatus is used to calculate the thermal conductivity of metal rod (Copper).
Experimental setup consisting of:

Test rod of copper of 12mm dia. and 200mm long.

Ring type Heater

Cooling chamber of dia125mm and 50mm long with arrangement for water circulation

Shell filled with asbestos insulating powder

Set of thermocouples - 6 Nos.

Control panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A / 230V

Mains ON/OFF switch

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

2.Thermal Conductivity of Insulation Powder Apparatus

This apparatus is used to calculate the thermal conductivity of Insulating Powder (Asbestos Powder).
Experimental setup consisting of:

Mica insulated nichrome Ring type heater

Inner copper sphere of radius 100mm

Outer copper sphere of radius 200mm

Set of thermocouple - 4 Nos.

Asbestos Powder is filled in between the outer sphere and inner sphere.

Control panel consisting of:

4 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A /230V

Mains ON/OFF switch

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

3. Thermal Conductivity of Liquid Apparatus

This experiment is used to calculate the thermal conductivity of liquid (commercial glycerol).
Experimental setup consisting of:

Commercial glycerol filled between the metal plates of dia170mm.

Disk type heater

Cooling chamber with water circulation.

Central heat ring.

Thermocouple - 4 Nos.

Control panel consisting of:

4 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A / 230V

Mains ON/OFF switch

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

4. Pin Fin In Natural/Forced Convection Apparatus

This apparatus is used to calculate the heat transfer coefficient of vertical pin in natural convection / forced convection.
Experimental set up consisting of:

Vertical pin of dia 12and 125mm long fitted on a heater.

Blower unit with orifice of 14mm and manometer arrangement for flow measurement.

Duct of size : 100 X 150 x 500 mm

Pin-Fin : Brass

Ring type Heater

Set of Thermocouples: Cr/Al - 6 Nos.

Control Panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A / 230V

Mains ON/OFF switch

Air Blower

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

5. Natural Convection From Vertical Cylinder Apparatus

This apparatus is used to find out the heat transfer coefficient of vertical cylinder in natural convection.
Experimental Setup consisting of:

Brass tube vertical cylinder of dia 32mm and 500mm long.

Duct of size : 150 X 150 x 500 mm

Set of Thermocouple - 6 Nos.

Ring type Heater.
Control Panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A /230V

Mains ON/OFF switch

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

6. Forced Convection From Horizontal Cylinder Apparatus

This apparatus is used to find out the surface heat transfer coefficient for a horizontal pipe flowing heat by forced convection to air flowing through it for different air flow rates and heat flow rate.
Experimental Setup consisting of:

Horizontal pipe of internal dia25mm and length 300mm

Blower with orifice plate of dia. 15mm and manometer for flow measurement.

Long type heater on test section.

Set of Thermocouple - 6 Nos.
Control Panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A / 230V

Mains ON/OFF switch

Air Blower

Digital Voltmeter 0-100/250V

Digital Ammeter 0-2 A.

7. Emissivity Measurement Apparatus

The apparatus is used to measure the emissivity of a metal.
Experimental Setup consisting of:

Test plate: Polished aluminum of dia 125mm

Reference plate : black aluminum of dia 125mm

Wooden chamber with Perspex cover.

Mica-insulated heaters for black and polished body.

Set of Thermocouple - 3 Nos.
Control Panel consisting of:

3 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat - 2 Nos. of 0-2A/230V

Mains ON/OFF switch

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

8. Parallel Flow/Counter Flow Heat Exchanger Apparatus

The apparatus is used to calculate heat transfer rate and LMTD in parallel and counter flow.
Experimental Setup consisting of:

Outer tube of inter I.D. 25mm and length 1.2metre.

Inner tube of I.D. 10 mm and length 1.5metr.

Thermocouples - 5 Nos.

Arrangement for making parallel and counter flow.
Heating arrangement:

Cold water storage tank.

Hot water stroge tank temp constant through thermostat.

Electric industrial heater of 2 KW.
Control panel consisting of:

5 Channels Digital Temp. Indicator range: 0-200oC

Digital Voltmeter 0-250V

Digital Ammeter 0-2A

9. Stefan Boltzmann Apparatus

This apparatus is used to calculate the Stefan Boltzman constant.
Experimental setup consisting of:

Copper hemi-sphere of dia 200mm enclosed in metal water jacket.

Hot water tank with emission heater.

Test disc of dia 25mm and weight 5gm.

Set of thermocouple - 3 Nos.
Control panel consisting of:

3-Channel Temperature Indicator 0-200oC

Mains ON/OFF switch.

Digital Voltmeter 0-250V

Digital Ammeter 0-2A

10. Heat Pipe Demonstrator Apparatus

This apparatus is used to demonstrate the working of heat pipe also compare with the working of pipe of copper and stainless steel.
Experimental Set-up consisting of:

Heat pipe made of stainless steel of dia15mm and 300mm long

Two standard pipes : Copper & SS one each of 15mm dia of 300mm long.

Heater 200 Watts - 3 Nos.

Condenser Tank - 3 Nos.

Set of thermocouples - 6 Nos.
Control Panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-4A / 230 V

Digital Voltmeter : 0-250oC

Digital Ammeter : 0 to 2A

11. Composite Wall Apparatus

This apparatus is used to calculate the heat transfer through composite wall.
Experimental setup consisting of:

Three composite walls Aluminum, Bakelite and wooden of dia125mm, and 12mm thick.

Disk heater ring

Central heat ring.

Thermocouple - 6 Nos.
Control panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-2A / 230V

Mains ON/OFF switch

Digital Voltmeter 0-250V

Digital Ammeter 0-2 A.

12. Lagged Pipe Apparatus

Experimental set-up consisting of:

Pipes 3 Nos.
• 1stPipe Diameter 100mm & 500mm Long
• 2nd Pipe Diameter 75mm & 500mm Long
• 3rdPipe Diameter 50mm & 500mm Long

Nichrome Wire Heater

Set of thermocouples
Control Panel Consisting of:

Temperature Indicator 6 channel 0 to 300oC

Main ON/OFF switch.

Digital Voltmeter 0-23OV

Digital Ammeter 0-2A

13. Heat Conduction Apparatus

This apparatus is used to demonstrate the working of heat pipe also compare with the working of pipe of copper and stainless steel.
Experimental Set-up consisting of:

Heat pipe made of stainless steel of dia15mm and 300mm long

Two standard pipes : Copper & SS one each of 15mm dia of 300mm long.

Heater 200 Watts - 3 Nos.

Condenser Tank - 3 Nos.

Set of thermocouples - 6 Nos.
Control Panel consisting of:

6 Channels Digital Temp. Indicator range: 0-300oC

Dimmerstat : 0-4A / 230 V

Digital Voltmeter : 0-250oC

Digital Ammeter : 0 to 2A

14. Pool Boiling Apparatus

Experimental setup consisting of :

Glass trough

Stand for glass through

Band heater test heater assembly.

Thermometer : 0-100oC

Magnifying glass.
Control panel consisting of:

Digital Ammeter : 0-2A

Digital Voltmeter : 0-230V

Main ON/OFF switch.
Dimmerstat : 0-8A