Pumps, This unit are a self-contained recirculation type unit. All the measurements are provided to evaluate the performance of the pump. The system is closed circuit.
Water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine. The system is closed circuit.
Specifications:
This is a reaction turbine and this test rig shows the construction and working of francis turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orificemeter are used to measure the input of turbine. The system is closed circuit.
Specifications:
This is a Kaplan turbine and this test rig shows the construction and working of Kaplan turbine. Rope brake dynamometer is used to measure the output of turbine. Pressure gauge and orificemeter are used to measure the input of turbine. The system is closed circuit.
Specifications:
Centrifugal pump are Dynamic Pressure Pumps. This unit is a self-contained recirculation type unit. All the measurements are provided to evaluate the performance of the pump. The system is closed circuit.
Specifications:
Reciprocating double acting Pumps are positive displacement pumps. This unit is a self-contained recirculation type unit. All the measurements are provided to evaluate the performance of the pump. The system is closed circuit.
Specifications:
The Hydraulic Ram is a pump which rise the water without any external power for its operation when large quantity of water is available at a small height, a small quantity of water can be raised to a greater height with the help of hydraulic ram. This works on the principle of water hammer. The system is closed circuit.
Specifications:
It consists of a suitable size centrifugal pump 2 H.P. A Motor to make the supply from sump tank to supply tank. This apparatus consists of fiber coated MS sump tank of suitable capacity. Supply Tank: Fiber coated MS tank fixed on angle frame & Capacity 150 Liter.
Measuring tanks: Two fiber coated MS tank fitted with piezometric tube to measure the waste water and useful water. Air vessel is provided to perform the phenomena of water hammer. A pressure gauge is fitted on useful water pipe line to measure the head of water.
Experimental capability:-
The hydraulic flume should be of size 150mm depth x 250mm wide x 4 meter length built with extra strong 75mm x 50mm. Thickness 4mm through. MS channel b for strength and rigidity. Both vertical sides provided with transparent thick 6mm Perspex for flow visualization at least for 4 meter length. The 16 gauge M.S. Sheet nearly fixed to MS angle frame with rubber packing. The upstream and downstream sections provided with two numbers of fine gates with rack (GM) pinion arrangement for accurate and smooth operation to facilitate the varying the discharge and head water. The sides provided with inverted Tee section (MS) for smooth running of movable hook gauge trolley. The tilting arrangement provided with a fine arrangement which can be operated very smoothly. The slope of the flume ranges up to +5 degree. The tilting arrangement operated by both forward and backward slope settings. For hydraulic different types of experiments the accessories should be incorporated like
Specifications:
a) Length of wind tunnel - 3.5m.
b) Axial flow fan and the duct - 1.1m long
c) Maximum height - 2.0m
d) Test solution - 30cm x 30cm cross-section and 100cm length
e) Air speed - 20mps
f) Motor for axial flow fan – 3HP, AC motor.
g) Speed Control for AC Motor.
h) Blades of fan shall be made of Aluminum cast aerofoil
