Measurement/ Instrumentation Lab | 9997200000 | Load Measurement Tutor Load Cell in roorkee

Our Products

Measurement/ Instrumentation Lab :

1. Displacement Measurement Tutor LVDT

Range : 0 to 20 mm
Display : 3-1/2 digit LED
Resolution : 0.1 mm
Excitation : 2 Volts RMS 5 KHz, Sinewave
Power supply : 230V +/-10%, 50 Hz.

Calibration Bench with 20mm micrometer.

Test point also provided. Complete with operation manual.
Experiments:

To study waveform at different points.

To plot Displacement vs. Digital Voltmeter reading.

2. Load Measurement Tutor Load Cell

Range : 0 to 1 kg
Display : 3-1/2 digit LED
Resolution : 0.01 kg.
Excitation : 5 Volts DC
Power source : 230V +/-10%, 50 Hz.

With 4 Nos. of 1/2 kg. weight.

Test point also provided. Complete with Operating manual.
Experiment:

To plot Load Vs Digital Voltmeter reading

To plot Load Vs Load Cell signal

3. Pressure Measurement Tutor Pressure Transducer

Range : 0 to 10 kg/cm2
Display : 3-1/2 digit LED
Resolution : 0.1 kg/cm2
Excitation : 5 Volts DC
Power source : 230V +/-10%, 50 Hz.

Hydraulic Pressure Generating Pump with pressure gauge of 10 kg/cm2

Test Point also provided. Complete with Operating Manual.
Experiment:

To plot Pressure Vs Digital Voltmeter reading

To plot Pressure Vs Pressure cell signal

4. Strain Measurement Tutor Strain Cantilever Beam

Range : 0 to 400 microstrain
Display : 3-1/2 digit LED
Resolution : 1 microstrain
Excitation : 5 Volts, DC
Power source : 230V +/-10%, 50 Hz.

Strain Cantilever beam past full bridge strain gauges.

With 4 Nos. Sliding weight of 250 gm.

Test point also provided. Complete Operation manual.
Experiment:

To plot Strain vs. Digital Voltmeter reading

To plot Strain vs. Strain cell signal.

5. Torque Measurement Tutor Torque Transducer

Range : 0 to 1 Kg-m.
Resolution : 0.01 kg-m
Display : 3-1/2 digit LED
Excitation : 5 Volts DC
Power source : 230V +/-10%, 50 Hz.

With 4 Nos. Sliding Weight of 250 gm.

Test Point also provided. Complete with operational manual.
Experiment:

To plot Torque Vs. Digital Voltmeter reading

To plot Torque vs. Torque Transducer signal.

6. Angular Measurement Tutor (Capacitive Transducer)

Range : 0 to 360o
Display : 3-1/2 digit LED
Resolution : 1o
Power source : 230V +/-10%, 50 Hz.

Acrylic Jar with scale.

Test Point also provided. Complete with Operating Manual.
Experiment:

To plot Water Level Vs. Digital Voltmeter reading

To plot Water Level Vs. Water Level Sensor signal

7. Temperature Measurement Tutor Using RTD Sensor

Range : 100oC
Display : 3-1/2 digit LED
Resolution : 0.1oC
Power source : 230V +/-10%, 50 Hz.

Heating and cooling arrangement with Thermometer.

Test point also provided. Complete with Operating Manual.
Experiment:

To plot Temperature Vs. Digital Voltmeter reading

To study of characteristics of RTD

8. Temperature Measurement Tutor Using Thermocouple

Range : 100oC
Display : 3-1/2 digit LED
Resolution : 0.1oC
Power source : 230V +/-10%, 50 Hz.

Heating and cooling arrangement with Thermometer.

Test point also provided. Complete with Operating Manual.
Experiment:

To plot Temperature Vs. Digital Voltmeter reading

To study of characteristics of Thermocouple.

9. Speed Measurements Tutor Using

Range : Upto 2500 RPM
Display : 3-1/2 digit LED
Resolution : 1 RPM
Power source : 230V +/-10%, 50 Hz.

With small AC motor.

Test Point also provided. Complete with operational manual.
Experiment:

To plot Speed Vs. Digital Voltmeter reading

To plot Speed Vs. Square wave of sensor

10. Dead Weight Pressure Gauge Tester

Range : 0 to 50 kg/cm2
Range : 0 to 100 kg/cm2

With gauge connector of 1/2" BSP and complete with one set of weights in storage box, 1 instruction manual and tool box.